Top Recommended Deals
Anker SOLIX F3800 + Smart Home Power Kit
1×AnkerCredits valid for Anker Members
Anker SOLIX F3800 + Smart Home Power Kit
30 Days Price Match Guarantee
- You may be eligible for the Residential Clean Energy Credit, which equals up to 30% of the cost of new, qualified clean energy property for private residences. learn more.
- Seamlessly integrates Anker SOLIX F3800, utility grid, and roof solar power.
- Provides backup power for essential home appliances during outages.
- Easily control and monitor energy usage with the Anker app.
- Avoid peak rate charges and optimize energy consumption.
- Significantly promotes sustainability and self-sufficiency.
-
Note:
Due to anti-islanding requirements, all grid-tie solar inverters must stop feeding power to the grid during an outage. Therefore, please note that your grid-tie solar array will NOT charge the SOLIX F3800 via the Anker SOLIX Home Power Panel when the grid is down.
Anker SOLIX F3800
The Most Accessible
Whole-Home Backup Power
Whole-Home Backup Power
Minimum Effort, Maximum Power
Anker SOLIX Home Power System
- Home Backup
- Professional Power
- Power for EVs
- Power for RVs
What's in the Box
Anker SOLIX F3800
Anker Home Power Panel
Subpanel
Anker SOLIX 100A/240V Breaker
Anker SOLIX Ground Bar Kit
AC Charging Cable
MC4 3-Port Solar Charging Connector × 2
User Manual
Select Power That Meets Your Needs
Specs
AC Output Power
6,000W
12,000W
6,000W
6,000W
AC Output Voltage
120V/240V
120V/240V
120V/240V
120V/240V
AC Input
120V/240V
120V/240V
120V
120V
Battery Capacity
3840Wh
7680Wh
3840Wh
3840Wh
Max. Scalability
Up to 2 × F3800s;
12 × BP3800 Expansion Batteries
Up to 2 × F3800s;
12 × BP3800 Expansion Batteries
Up to 1 × F3800s;
6 × BP3800 Expansion Batteries
(Double Power Hub Coming this June)
Up to 1 × F3800s;
6 × BP3800 Expansion Batteries
(Double Power Hub Coming this June)
Solar Input (via XT-60)
2400W (1200W*2)
MPPT1: 11-15V⎓ 10A; 16V-60V⎓ 27A Max
MPPT2: 11-15V⎓ 10A; 16V-60V⎓ 27A Max
(firmware 2.1.1+)
4800W
2400W (1200W*2)
MPPT1: 11-15V⎓ 10A; 16V-60V⎓ 27A Max
MPPT2: 11-15V⎓ 10A; 16V-60V⎓ 27A Max
(firmware 2.1.1+)
2400W (1200W*2)
MPPT1: 11-15V⎓ 10A; 16V-60V⎓ 27A Max
MPPT2: 11-15V⎓ 10A; 16V-60V⎓ 27A Max
(firmware 2.1.1+)
Grid-Tied Solar System
YES, Up to 1900W
YES, Up to 3800W
-
-
Auto Home Backup Switch
YES
YES
-
-
Home Energy Modes
Auto Home Backup;
Time-based Control;
Self-powered
Auto Home Backup;
Time-based Control;
Self-powered
-
Manual Home Backup
FAQ
Q1: What should I do when using a solar charger to charge Anker SOLIX F3800?
The solar input supports an 11-60V solar charger with an XT-60 connector. If you use an 11-15V solar charger, the current supports 10A max. When you use a 15-60V solar charger, the current supports 27A max (firmware 2.1.1+).
Q2: Why is the power station not working after it hasn't been used for a long time?
If the power station is stored at a low capacity for a long time, lithium batteries will self-consume power which may lead to a quick discharge. This leads to poor conductivity and a reduced battery lifespan, resulting in poor battery performance.
Q3: How should I store and maintain the power station?
To store your portable power station, make sure you have:
1. Turned off all outputs.
2. Store it in a cool and dry place.
3. Check the battery capacity each week. If it's below 30%, fully charge.
4. Charge the power station to 100% every 3 months.
1. Turned off all outputs.
2. Store it in a cool and dry place.
3. Check the battery capacity each week. If it's below 30%, fully charge.
4. Charge the power station to 100% every 3 months.
Q4: When recharging Anker SOLIX F3800 Portable Power Station with AC power, can I use its 240V outlet to charge other devices?
No, when Anker SOLIX F3800 is recharging with AC power, you can only use its 120V UPS outlet to charge other devices.
Q5: How do I charge my electric vehicle?
Double-press the 240V power switch to activate EV mode charging, then you can recharge your EV.
Q6: What is the maximum solar panel voltage for charging Anker SOLIX F3800 Portable Power Station?
The maximum open-circuit voltage of each solar input port is 60V. If you want to chain the solar panels in series, the total open-circuit voltage must not exceed 60V.
