Anker SOLIX F1500 Solar Generator + 2× 100W Solar Panels

Any 11-60V solar charger with an XT-60 female connector.

Turn off all outputs when not in use to avoid the battery from draining.
Store in a dry and cool area.
Check the battery capacity each week. If the battery level is below 30%, charge the power station to 100%. Fully charge it once every 3 months.

You can use this formula to calculate this time: (1536 × 0.8) / Device Wattage
Note: This formula only applies to devices with 300W or greater.

When any control buttons are turned on, even if no devices are being charged, there will be a certain amount of no-load power consumption. We recommend turning off the button when you are not using the power station.

No, AC input is a priority input source if both are connected. When AC recharging is not used, it will automatically switch to DC recharging.