The solar input supports an 11-60V solar charger with an XT-60 connector. If you use an 11-15V solar charger, the current supports 10A max. When you use a 15-60V solar charger, the current supports 27A max (firmware 2.1.1+).

If the power station is stored at a low capacity for a long time, lithium batteries will self-consume power which may lead to a quick discharge. This leads to poor conductivity and a reduced battery lifespan, resulting in poor battery performance.

To store your portable power station, make sure you have:
1. Turned off all outputs.
2. Store it in a cool and dry place.
3. Check the battery capacity each week. If it's below 30%, fully charge.
4. Charge the power station to 100% every 3 months.

No, when Anker SOLIX F3800 is recharging with AC power, you can only use its 120V UPS outlet to charge other devices.

Double-press the 240V power switch to activate EV mode charging, then you can recharge your EV.

The maximum open-circuit voltage of each solar input port is 60V. If you want to chain the solar panels in series, the total open-circuit voltage must not exceed 60V.